-
WEH® TW152 | Oxygen Filling ConnectorThe quick coupling TW152 is ideally suited for filling of oxygen cylinders with pressure regulator and protection cap. The connector is optionally available with either inline or 90° media inlet and for cylinder valves with residual pressure valve or non-residual pressure valve. All filling connectors dispose of venting bores in the sliding sleeve for lateral gas venting in case of accidental gas leakage reducing the risk of spontaneous ignition.
Operating is quite simple: Simply push the connector onto the male thread of the cylinder valve and push the sliding sleeve forwards. The expandable thread segments clamp onto the standard thread of the cylinder valve firmly, creating a pressure-tight connection. Its ease of operation is gentle on the operator’s joints.
The connector is fitted with an internal locking mechanism to prevent it from disconnecting while under pressure. This ensures the highest possible level of safety for the operator.
The filling connector is fitted with venting bore holes in its sliding sleeve. The venting bores direct any oxygen that may accidentally escape from the cylinder valve off to the side, thus reducing the danger of fire.
The quick connector is available for gas cylinder valves conforming to DIN, BS, NF, CGA, etc. All connectors are oxygen cleaned, and are free of oils and greases (oxygen tested).
- For oxygen cylinders with male thread (with or without a residual pressure valve) and pressure regulator
- Connection in seconds
- No hand tightening required
- Automatic locking of the sliding sleeve under pressure prevents disconnection at pressures exceeding 5 bar
- Inline or 90° version available
- WEH® Jaw Locking Mechanism
- High-grade materials
Nominal pressure PN | 200 bar (3,000 psi) |
Max. allowable operating pressure PS | 250 bar (3,600 psi) |
Temperature range | +5 °C up to +60 °C (O₂) |
Medium | Medical oxygen |
Actuation | Manual actuation via sliding sleeve |
Design | With or without RPV pin |
Material | Corrosion resistant stainless steel and brass |
Sealing material | EPDM |
Conformity / Tests / Approvals | Type approval for suitability against adiabatic compression available |
- With or without RPV pin ( for residual pressure valves or non-residual pressure valves)
- Inline or 90° media inlet
Other connections and sizes according to your corresponding national standard on request.
High pressure fill coupling for oxygen cylinders with external thread - WEH® TW152
The manually actuated quick coupling TW152 is the ideal fitting for high pressure filling for gas cylinders with medical oxygen up to max. 200 bar. The quick coupler connects instantly to your gas cylinder valve with external thread. They offer quick connect and quick disconnect thanks to the WEH® Jaw Locking Mechanism and the easy to operate sliding sleeve. Just push to connect. The TW152 quick release coupling is designed for gas cylinders with a pressure regulator and available with or without RPV-Pin and with inline or 90° media inlet.