Description
WEH® Receptacle TN1 H₂ High-Flow for refuelling of buses and trucks (EC79), with external thread UN 11/16"-16, prepared for data interface, DN 6, 350 bar
The WEH® TN1 H₂ Receptacle with external thread (prepared for data interface) was developed to be used with the WEH® TK16 H₂ High-Flow Fuelling Nozzle, enabling to refuel buses and trucks from now on at cars fuelling stations.Refuelling with a higher speed occurs either with a TK16 H₂ Fuelling Nozzle or with a TK16 H₂ High-Flow Fuelling Nozzle. Due to the internal aerodynamic design the receptacle gives low noise (no high frequency whistle) combined with maximum flow rate and fast filling. The receptacle is a very durable unit, minimizing maintenance and down-time.
The WEH® TN1 H₂ High-Flow Receptacle has an integrated check valve system which is designed to minimize the effect that dirt particles have on the sealing components within the receptacle. The TN1 H₂ High-Flow is also equipped with a coding for pressure range and gas type.
Features
- EC79 approval available
- Flow rate: 100 - 120 g/sec
- Low-noise refuelling
- Integrated self-cleaning particle filter (40 micron)
- Integrated high-flow check valve
- Sealing-friendly design
- Coding for pressure range / gas type
Technical Data
Nominal bore (DN) | 6 mm |
Pressure range | PN = 350 bar (5,000 psi) | PS = 450 bar | PT = 675 bar |
Temperature range | -40 °C up to +85 °C |
Material | Corrosion resistant |
Sealing material | Hydrogen compatible |
Filter element | 40 micron |
Design | With protection cap and integrated particle filter (40 micron) |
Conformity / Tests / Approvals | EC79 SAE J2600:2002 |
Part No. | C1-94306 |
Application
High-Flow receptacle with external thread (prepared for data interface) acc. to EC79 for refuelling of buses and trucks with hydrogen.
Downloads